need major help error

need major help error

Hammer Mapping — Page [1]
FootBallBat
2008 Mar 16 • 175
ok i tried to make a pool so i built it and sunk it into the ground and then carved it and thats when everything F***ed up so i deleted the entire floor (everything) then put one big brush there as a new floor and map still does not want to compile. PLEASE can someone help me spent weeks on this map:(

hlcsg: Error: Entity 0, Brush 435, Side 0: plane with no normal

hlcsg: Error: plane with no normal
Description: The map has a problem which must be fixed
Howto Fix: Check the file ZHLTProblems.html for a detailed explanation of this problem


hlcsg: Error: Entity 0, Brush 435, Side 1: plane with no normal

hlcsg: Error: Entity 0, Brush 435, Side 1: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 435, Side 2: plane with no normal

hlcsg: Error: Entity 0, Brush 435, Side 2: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 435, Side 2: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 435, Side 3: plane with no normal

hlcsg: Error: Entity 0, Brush 435, Side 3: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 435, Side 3: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 435, Side 3: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 436, Side 0: plane with no normal

hlcsg: Error: Entity 0, Brush 436, Side 1: plane with no normal

hlcsg: Error: Entity 0, Brush 436, Side 1: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 436, Side 2: plane with no normal

hlcsg: Error: Entity 0, Brush 436, Side 2: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 436, Side 2: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 436, Side 3: plane with no normal

hlcsg: Error: Entity 0, Brush 436, Side 3: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 436, Side 3: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 436, Side 3: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2

hlcsg: Error: Entity 0, Brush 437, Side 0: plane with no normal

hlcsg: Error: Entity 0, Brush 437, Side 1: plane with no normal

hlcsg: Error: Entity 0, Brush 437, Side 1: has a coplanar plane at (362, 575, -996), texture 06_FENCE_STONE_

hlcsg: Error: Entity 0, Brush 437, Side 2: plane with no normal

hlcsg: Error: Entity 0, Brush 437, Side 2: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_

hlcsg: Error: Entity 0, Brush 437, Side 2: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_

hlcsg: Error: Entity 0, Brush 437, Side 3: plane with no normal

hlcsg: Error: Entity 0, Brush 437, Side 3: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_

hlcsg: Error: Entity 0, Brush 437, Side 3: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_

hlcsg: Error: Entity 0, Brush 437, Side 3: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_





hlcsg v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlcsg -----
Command line: hlcsg -nowadtextures hotel
Entering hotel.map

Current hlcsg Settings
Name | Setting | Default
---------------------|-----------|-------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
onlyents [ off ] [ off ]
wadtextures [ off ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
Error: Entity 0, Brush 435, Side 0: plane with no normal
Error: plane with no normal
Description: The map has a problem which must be fixed
Howto Fix: Check the file ZHLTProblems.html for a detailed explanation of this problem

Error: Entity 0, Brush 435, Side 1: plane with no normal
Error: Entity 0, Brush 435, Side 1: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2
Error: Entity 0, Brush 435, Side 2: plane with no normal
Error: Entity 0, Brush 435, Side 2: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2
Error: Entity 0, Brush 435, Side 2: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2
Error: Entity 0, Brush 435, Side 3: plane with no normal
Error: Entity 0, Brush 435, Side 3: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2
Error: Entity 0, Brush 435, Side 3: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2
Error: Entity 0, Brush 435, Side 3: has a coplanar plane at (362, 575, -1000), texture TILEFLOOR2
Error: Entity 0, Brush 436, Side 0: plane with no normal
Error: Entity 0, Brush 436, Side 1: plane with no normal
Error: Entity 0, Brush 436, Side 1: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2
Error: Entity 0, Brush 436, Side 2: plane with no normal
Error: Entity 0, Brush 436, Side 2: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2
Error: Entity 0, Brush 436, Side 2: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2
Error: Entity 0, Brush 436, Side 3: plane with no normal
Error: Entity 0, Brush 436, Side 3: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2
Error: Entity 0, Brush 436, Side 3: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2
Error: Entity 0, Brush 436, Side 3: has a coplanar plane at (362, 575, -996), texture TILEFLOOR2
Error: Entity 0, Brush 437, Side 0: plane with no normal
Error: Entity 0, Brush 437, Side 1: plane with no normal
Error: Entity 0, Brush 437, Side 1: has a coplanar plane at (362, 575, -996), texture 06_FENCE_STONE_
Error: Entity 0, Brush 437, Side 2: plane with no normal
Error: Entity 0, Brush 437, Side 2: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_
Error: Entity 0, Brush 437, Side 2: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_
Error: Entity 0, Brush 437, Side 3: plane with no normal
Error: Entity 0, Brush 437, Side 3: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_
Error: Entity 0, Brush 437, Side 3: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_
Error: Entity 0, Brush 437, Side 3: has a coplanar plane at (362, 575, -1000), texture 06_FENCE_STONE_
(0.61 seconds)

----- END hlcsg -----



hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlbsp -----
Command line: hlbsp hotel
>> There was a problem compiling the map.
>> Check the file hotel.log for the cause.

----- END hlbsp -----



hlvis v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlvis -----
Command line: hlvis hotel -fast
>> There was a problem compiling the map.
>> Check the file hotel.log for the cause.

----- END hlvis -----



hlrad v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlrad -----
Command line: hlrad hotel
>> There was a problem compiling the map.
>> Check the file hotel.log for the cause.

----- END hlrad -----



God I Suck At This.
 
 
2008 May 29 at 23:06 PDT
SRAW
Rocket Man

2007 Nov 6 • 2525
601 ₧
give a screenie of the floor, and btw i get tat error somthines, its because of vertex manipulation sometimes
Free Steam Games
 
 
2008 May 30 at 00:13 PDT
Down Rodeo
Cap'n Moth of the Firehouse

Find the Hole II Participation Medal
2007 Oct 19 • 5486
57,583 ₧
We've seen this error a few times. It always ends in tears and destroying the brushes involved. So, go to the brushes mentioned in the log and get rid of 'em. That's all you can do.
 
 
2008 May 30 at 03:54 PDT
FootBallBat
2008 Mar 16 • 175
ok i have an idea but i need someones help the map cant compile but the map saved into my cstrike/maps folder all i need is a program that can convert it from a .bsp file to a .map file. i have winbspc that use to work fine but i got some kind or error on it and i cant convert it anymore does anyone know of another program. please
God I Suck At This.
 
 
2008 May 30 at 13:48 PDT
Down Rodeo
Cap'n Moth of the Firehouse

Find the Hole II Participation Medal
2007 Oct 19 • 5486
57,583 ₧
The .map files generated from .bsp files are generally not usable. They produce far more brushes than are needed and... don't bother essentially.
 
 
2008 May 30 at 14:00 PDT
FootBallBat
2008 Mar 16 • 175
any idea on how to get my map from my cstike/map folder?
God I Suck At This.
 
 
2008 May 30 at 14:04 PDT
FootBallBat
2008 Mar 16 • 175
is there an easy way to find the brushes i need to delete? is there like a "find" key so i can find a brush number?
God I Suck At This.
 
 
2008 May 30 at 14:07 PDT
Down Rodeo
Cap'n Moth of the Firehouse

Find the Hole II Participation Medal
2007 Oct 19 • 5486
57,583 ₧
Yeah. There's a Go to brush number option in one of the menus, might be file. Dunno though.
 
 
2008 May 30 at 14:50 PDT
FootBallBat
2008 Mar 16 • 175
thanks everyone i fixed everything now im back on track.
God I Suck At This.
 
 
2008 May 30 at 14:54 PDT
Page [1]