Some questions i cant find sollution

Some questions i cant find sollution

Hammer Mapping — Page [1]
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
Hello gyus. I am a new member of this very nice little community and has realy hlped me. Now i have some of myu own questions.

ok so when i try to compile a map the bat files sais that the windows cannot locate the chosen file path.... i have absolutely no idea what that might be.

Also another question is about textures. I have read that in order to be visible in game thay have to be in the same folder as what????

Well if some1 would be happy to answer plz do.
 
 
2009 Jan 16 at 04:09 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
If a file could not be located, you probably wrote the wrong filepath in mapname.bat - take a look and make sure you copied it correctly. Another possibility is that you have ZHLT and CS on 2 different drives. They must both be on the same drive.

I didn't quite understand the 2nd question.
May contain traces of invisible text.
 
 
2009 Jan 16 at 04:44 PST
Down Rodeo
Cap'n Moth of the Firehouse

Find the Hole II Participation Medal
2007 Oct 19 • 5485
57,583 ₧
If Windows cannot find the file then it is not where it is looking for. Check the path in the last line of your batch file; it should point to where CS is. Also the textures need... in fact, never mind. If you want no problem with textures compile the map with the switch nowadtextures.
 
 
2009 Jan 16 at 04:46 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
I maen that i have read somewere about some problems in other forums that some textures ingame look like the AAA triger texture.
For the first question. I have checked all paths many times and tried comliling again and again. It doesnt seem to be working :(
 
 
2009 Jan 16 at 04:48 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
Is everything on the same drive?
May contain traces of invisible text.
 
 
2009 Jan 16 at 04:50 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
U mean the game and what else?
 
 
2009 Jan 16 at 04:52 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
ZHLT. (That's the compiling tools, your BAT file)
May contain traces of invisible text.
 
 
2009 Jan 16 at 04:53 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
yea they are in the C:\ hard drive both only in diffent folders. The game is in counter strike folder and the zhlt in a file by that name. i dont know if that had to do anything but it seems weird. When i open a new map to create in the textures window there is a white texture as default instead of the AAA triger one. does that have anything to do?
 
 
2009 Jan 16 at 04:56 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
It means you removed a WAD from the WAD-list in Hammer and now the texture is missing
May contain traces of invisible text.
 
 
2009 Jan 16 at 04:59 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
So it doesnt have to do anything with ma problem?
 
 
2009 Jan 16 at 05:00 PST
Down Rodeo
Cap'n Moth of the Firehouse

Find the Hole II Participation Medal
2007 Oct 19 • 5485
57,583 ₧
Probably not. I've seen this happen quite a lot, I don't trust Windows to find the files now...
 
 
2009 Jan 16 at 05:03 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
KnightOfH3ll said:
So it doesnt have to do anything with ma problem?


If the file that cannot be located is the WAD, then it does have to do with it.
May contain traces of invisible text.
 
 
2009 Jan 16 at 05:52 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
So do you suugest anything? Should i unistall the game and install again? i realy need to find a sollution to this. Do you need to post log?




PS: at the error log it sais something about an entity with coplanar plane. What the heck is the coplanar plane???
 
 
2009 Jan 16 at 07:19 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
It means your map has a bad brush. The error log gives you a brush and entity number- enter those numbers in Hammer: Map-> Go to brush number... Hammer will highlight the bad brush. Delete the brush and remake it.


About the "file not found" error, I have no advice except for make sure that everything is on the same drive and that everything exists.
May contain traces of invisible text.
 
 
2009 Jan 16 at 08:09 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
hlcsg v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlcsg -----
Command line: hlcsg -nowadtextures cs_gumnasio
Entering cs_gumnasio.map

Current hlcsg Settings
Name | Setting | Default
---------------------|-----------|-------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
onlyents [ off ] [ off ]
wadtextures [ off ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
Error: Entity 0, Brush 249, Side 7: has a coplanar plane at (-1839, -1941, -232), texture PL_OUT_SHELL5
Error: brush with coplanar faces
Description: The map has a problem which must be fixed
Howto Fix: Check the file ZHLTProblems.html for a detailed explanation of this problem

Error: Entity 0, Brush 255, Side 7: has a coplanar plane at (-1766, -1941, -231), texture PL_OUT_SHELL5
Error: Entity 0, Brush 261, Side 7: has a coplanar plane at (-1750, -2115, -231), texture PL_OUT_SHELL5
Error: Entity 0, Brush 267, Side 7: has a coplanar plane at (-1832, -2115, -230), texture PL_OUT_SHELL5
Error: Entity 0, Brush 273, Side 7: has a coplanar plane at (-1906, -2116, -229), texture PL_OUT_SHELL5
Error: Entity 0, Brush 279, Side 7: has a coplanar plane at (-1751, -1720, -232), texture PL_OUT_SHELL5
Error: Entity 0, Brush 285, Side 7: has a coplanar plane at (-1833, -1720, -231), texture PL_OUT_SHELL5
Error: Entity 0, Brush 291, Side 7: has a coplanar plane at (-1907, -1721, -230), texture PL_OUT_SHELL5
Error: Entity 0, Brush 303, Side 7: has a coplanar plane at (-1840, -1546, -233), texture PL_OUT_SHELL5
Error: Entity 0, Brush 309, Side 7: has a coplanar plane at (-1767, -1546, -232), texture PL_OUT_SHELL5
Error: Entity 0, Brush 315, Side 7: has a coplanar plane at (-1755, -1276, -230), texture PL_OUT_SHELL5
Error: Entity 0, Brush 321, Side 7: has a coplanar plane at (-1837, -1276, -229), texture PL_OUT_SHELL5
Error: Entity 0, Brush 327, Side 7: has a coplanar plane at (-1911, -1277, -228), texture PL_OUT_SHELL5
Error: Entity 0, Brush 339, Side 7: has a coplanar plane at (-1844, -1102, -231), texture PL_OUT_SHELL5
Error: Entity 0, Brush 345, Side 7: has a coplanar plane at (-1771, -1102, -230), texture PL_OUT_SHELL5
Error: Entity 0, Brush 351, Side 7: has a coplanar plane at (-1770, -985, -230), texture PL_OUT_SHELL5
Error: Entity 0, Brush 357, Side 7: has a coplanar plane at (-1852, -985, -229), texture PL_OUT_SHELL5
Error: Entity 0, Brush 363, Side 7: has a coplanar plane at (-1926, -986, -228), texture PL_OUT_SHELL5
Error: Entity 0, Brush 375, Side 7: has a coplanar plane at (-1859, -811, -231), texture PL_OUT_SHELL5
Error: Entity 0, Brush 381, Side 7: has a coplanar plane at (-1786, -811, -230), texture PL_OUT_SHELL5
Error: Entity 21, Brush 10, Side 0: plane with no normal
Error: Entity 21, Brush 10, Side 1: plane with no normal
Error: Entity 21, Brush 10, Side 1: has a coplanar plane at (-352, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 10, Side 2: plane with no normal
Error: Entity 21, Brush 10, Side 2: has a coplanar plane at (-352, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 10, Side 2: has a coplanar plane at (-352, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 0: plane with no normal
Error: Entity 21, Brush 11, Side 1: plane with no normal
Error: Entity 21, Brush 11, Side 1: has a coplanar plane at (-352, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 2: plane with no normal
Error: Entity 21, Brush 11, Side 2: has a coplanar plane at (-352, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 2: has a coplanar plane at (-352, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 4: plane with no normal
Error: Entity 21, Brush 11, Side 4: has a coplanar plane at (-351, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 4: has a coplanar plane at (-351, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 4: has a coplanar plane at (-351, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 11, Side 5: has a coplanar plane at (-351, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 0: plane with no normal
Error: Entity 21, Brush 13, Side 1: plane with no normal
Error: Entity 21, Brush 13, Side 1: has a coplanar plane at (-351, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 3: plane with no normal
Error: Entity 21, Brush 13, Side 3: has a coplanar plane at (-351, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 3: has a coplanar plane at (-351, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 4: plane with no normal
Error: Entity 21, Brush 13, Side 4: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 4: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 4: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 13, Side 5: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 14, Side 0: plane with no normal
Error: Entity 21, Brush 14, Side 1: plane with no normal
Error: Entity 21, Brush 14, Side 1: has a coplanar plane at (-333, -1373, -152), texture TWN-DOOR02
Error: Entity 21, Brush 14, Side 3: plane with no normal
Error: Entity 21, Brush 14, Side 3: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 14, Side 3: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 14, Side 4: has a coplanar plane at (-333, -1373, -152), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 0: plane with no normal
Error: Entity 21, Brush 16, Side 1: plane with no normal
Error: Entity 21, Brush 16, Side 1: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 2: plane with no normal
Error: Entity 21, Brush 16, Side 2: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 2: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 3: plane with no normal
Error: Entity 21, Brush 16, Side 3: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 3: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 3: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 4: plane with no normal
Error: Entity 21, Brush 16, Side 4: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 4: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 4: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 4: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 5: plane with no normal
Error: Entity 21, Brush 16, Side 5: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 5: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 5: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 5: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 16, Side 5: has a coplanar plane at (-333, -1372, -171), texture TWN-DOOR02
Error: Entity 21, Brush 17, Side 0: plane with no normal
Error: Entity 21, Brush 17, Side 1: plane with no normal
Error: Entity 21, Brush 17, Side 1: has a coplanar plane at (-291, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 17, Side 2: plane with no normal
Error: Entity 21, Brush 17, Side 2: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 17, Side 2: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 17, Side 4: has a coplanar plane at (-333, -1373, -171), texture TWN-DOOR02
Error: Entity 21, Brush 25, Side 5: plane with no normal
(1.50 seconds)

----- END hlcsg -----



hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlbsp -----
Command line: hlbsp cs_gumnasio
>> There was a problem compiling the map.
>> Check the file cs_gumnasio.log for the cause.

----- END hlbsp -----



hlvis v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlvis -----
Command line: hlvis cs_gumnasio
>> There was a problem compiling the map.
>> Check the file cs_gumnasio.log for the cause.

----- END hlvis -----



hlrad v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlrad -----
Command line: hlrad cs_gumnasio
>> There was a problem compiling the map.
>> Check the file cs_gumnasio.log for the cause.

----- END hlrad -----



this what i get everytime i compile the map

any other compile way that is easier or at least working for me?
 
 
2009 Jan 16 at 08:30 PST — Ed. 2009 Jan 16 at 08:31 PST
Mate de Vita
Kelli

2008 Oct 4 • 2452
159 ₧
dude, eDan has already answered... Delete the bad brushes and remake them.

Vertex manipulation does NOT allow concave shapes! Remember that for the rest of your life...
...and that's the bottom line because Mate de Vita said so.
 
 
2009 Jan 16 at 08:33 PST — Ed. 2009 Jan 16 at 08:34 PST
Down Rodeo
Cap'n Moth of the Firehouse

Find the Hole II Participation Medal
2007 Oct 19 • 5485
57,583 ₧
There's no other way (there's not other way, all that you can do is watch them play...) because as MdV and Edan have said they are bad brushes. From a bad neighbourhood. If you always get this when you perform vertex manipulation, give up trying to model the stuff like that.
 
 
2009 Jan 16 at 14:01 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
i am qonfused right now and i want to understand something. if there is a bad brush with a coplanar plane , i cannot compile the map?

Sorry for all those questions but i am greek and the english requiered here is more advanced.
 
 
2009 Jan 17 at 00:15 PST
SRAW
Rocket Man

2007 Nov 6 • 2525
601 ₧
KnightOfH3ll said:
i am qonfused right now and i want to understand something. if there is a bad brush with a coplanar plane , i cannot compile the map?

Sorry for all those questions but i am greek and the english requiered here is more advanced.

it inst more than advanced, n00b and u cant compile it cause the gay engine cant render a fucked up brush like ur face
Free Steam Games
 
 
2009 Jan 17 at 00:19 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
Man u realy need to bee seen by a doctor. Damn whats the problem with u? I have been asking everything real nice. I dont get ur problem with me.
 
 
2009 Jan 17 at 00:26 PST
Killer-Duck
Homicidal Anatidae

2008 Mar 5 • 1169
633 ₧
KnightOfH3ll said:
Man u realy need to bee seen by a doctor. Damn whats the problem with u? I have been asking everything real nice. I dont get ur problem with me.


Don't take it personally, SRAW has always been like that...
QUACK! QUACK!
 
 
2009 Jan 17 at 02:12 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
If u say so....
 
 
2009 Jan 17 at 02:54 PST
eDan Co.
Mighty Typist

Real Live Hands-On Rabbi Medal
Consolation Medal
2007 Sep 24 • 2921
252 ₧
KnightOfH3ll said:
i am qonfused right now and i want to understand something. if there is a bad brush with a coplanar plane , i cannot compile the map?


No. Your map must not have any errors in order to compile. A bad brush in a playable map is like saying "this triangle has 5 sides". It just can't be! Now delete your bad brushes and use only textures that really exist. I suggest you start a new map because your current one seems way too buggy.
May contain traces of invisible text.
 
 
2009 Jan 17 at 04:21 PST — Ed. 2009 Jan 17 at 04:22 PST
KnightOfH3ll

2009 Jan 16 • 152
12 ₧
I have suprisingly found the problems and it seems to be working. Dont ask me how. I just got it. lol
 
 
2009 Jan 17 at 09:32 PST
SRAW
Rocket Man

2007 Nov 6 • 2525
601 ₧
Killer-Duck said:
KnightOfH3ll said:
Man u realy need to bee seen by a doctor. Damn whats the problem with u? I have been asking everything real nice. I dont get ur problem with me.


Don't take it personally, SRAW has always been like that...


off topic!!! kd now is a super-intelligent off-topic hammer bot
Free Steam Games
 
 
2009 Jan 17 at 21:48 PST
Page [1]